• Quick and easy to install.
• Easy to specify range of starter and extension bays in different heights and depths.
• Frames are pierced on a 75mm pitch to allow for positioning of beams.
• Bays will carry 6584kg with a maximum beam pitch of 1725mm.
• Beam locking pins prevent accidental displacement of beams by mechanical handling equipment.
• Frames are of bolted construction and supplied with painted Graphite Grey uprights and galvanised cross braces. Beams are painted yellow.

Design Notes

Frame depth
Frame depth is determined by the type and dimension of the pallets to be stores. The frame depth is normally calculated to allow a 50mm overhang front and rear beams. Good quality pallets are necessary to ensure storage on pallet racking.

Floor fixing
All bays are supplied with floor fixings. If bays are used as singles or ion runs of less than 3 bays they should be floor fixed using the optional B3 footplate. This reduces the bay load capacity to 4774kg using maximum beam pitch.

Bay Contents

Starter bays comprise 2 frames. 2 or 3 pairs of beams, locking clips, bolt on footplates and floor fixings. Extension bays are as above but with one frame.

Narrow aisle racking.	Drive-In-Racking
Double deep racking ideal for long/bulky products.	Standard racking installation